Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation. KEY FEATURES - Dot Fluid Calipers will have Bore Caps with a D etched. - Mineral Oil Caliper will have Bore Caps with an M etched. - Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount - Calipers designed to fit 140, 160 & 180mm rotors - Slimline 4 piston lightweight design - Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub - Available in Black, Silver, Bronze, Red, Blue, Purple and Orange - Top entry pad fitting - CNC machined from 2014 T6 aluminium ***Please note*** Shimano and SRAM brands belong to a third party and have no relation with Hope Technology RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems (Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo) Shimano Compatible Calipers (RX4+) Dura Ace Di2 R9270 / R9170 / R9120 / R9200 Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 / 105 Di2 R7170 / R7020 / Di2 R785 / RS685 / GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2 Campagnolo Compatible Calipers (RX4+) Ekar / Super Record / Record / Campagnolo H11 SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid) Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS / Sram Rival / Sram Apex / Sram S900
Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange
Hope Technology adds to their chainring offering with the R22. A new chainring specifically designed to be compatible with all new drivetrain systems The R22 features a new tooth profile to work with all major drivetrain types along with updated spider designs, and compatibility with 9/10/11 and 12 Speed drivetrains including SRAM T-Type and Shimano HG+. Key Features: // Asymmetric tooth profile engineered for cross compatibility and functionality with different drivetrain systems // 9/10/11 and 12 Speed compatible (including SRAM T-Type and Shimano HG+) // Improved mud shedding capability // Improved chain retention // Better performance with extreme chain angles on modern 1 x drivetrains // Tooth profile allows for more chain wear before function is compromised, extending service life // Spiderless rings have a new leg design with improved strength and stiffness // Machined from 7075-T6 aluminium // 28T to 36T size range // Available in Black, Silver, Blue, Red, Orange and Purple
Hope Technology adds to their chainring offering with the R22. A new chainring specifically designed to be compatible with all new drivetrain systems The R22 features a new tooth profile to work with all major drivetrain types along with updated spider designs, and compatibility with 9/10/11 and 12 Speed drivetrains including SRAM T-Type and Shimano HG+. Key Features: // Asymmetric tooth profile engineered for cross compatibility and functionality with different drivetrain systems // 9/10/11 and 12 Speed compatible (including SRAM T-Type and Shimano HG+) // Improved mud shedding capability // Improved chain retention // Better performance with extreme chain angles on modern 1 x drivetrains // Tooth profile allows for more chain wear before function is compromised, extending service life // Spiderless rings have a new leg design with improved strength and stiffness // Machined from 7075-T6 aluminium // 28T to 36T size range // Available in Black, Silver, Blue, Red, Orange and Purple
At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal. KEY FEATURES - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 7 pins per side or foot plates to give maximum contact between the shoe and pedal and so provide the greatest stability. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip on Union GC (14 pins) - Foot plate option on Pedal for maximum shoe/pedal contact
Brake pads include spring clip and pin Brake pads are dyno tested in-house in Barnoldswick Available for all our current brakes and older models All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes
- Cool Cover: helps reflect heat, so it stays cooler than traditional black saddles - Center channel cut out aids air flow and keeps blood flowing to all the right places - Water-resistant - Royalgel padding - Rails mounted on elastomers - Integrated Clip System
$0.50
RaceFace Crank Arm Fixing Bolts - M15
$0.70
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Service parts for Fox suspension.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.39
Brass compression olive for Hope hydraulic disc brakes.
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
Page 1 of 150 Next page