- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.

- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions ask - Model: EXA+ - Interface: P3 Connect - Shell: English - For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - 511% range is great for modern 1x drivetrains - 10 steel cogs, plus 1 aluminum cog increase durability - Saves weight by using smaller chainrings and shorter chains, which also provides better ground clearance - Designed for use with eBike drivetrains - Compatible with Shimano and SRAM drivetrains - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-17-20-24-28-33-39-46 - Drivetrain Speeds: 11 - Color: Black - Weight: 390 g

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - The TRS Plus cassette plugs directly into all SRAM Eagle and Shimano XTR, XT, and SLX 12-speed drivetrains - Smaller 9-46T cassette gives a better chainline, for longer-lasting drivetrains - The assembly utilizes XD™ Driver mounting to enable a 9-46T 12-speed cassette, keeping the drivetrain simple, yet providing the gear range of a 2X system - Designed to offer better ground clearance and be run with a smaller chainring to keep equivalent 10-50T gearing (10-50T w/34T chainring = 9-46T w/32T chainring) - 511% range - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-16-18-21-24-28-33-39-46 - Drivetrain Speeds: 12 - Color: Black - Weight: 336 g

The HELIX R Cassette is an upgrade to any SRAM™ Eagle™ or Shimano™ drivetrain, with more range than other cassettes on the market. The 9 tooth cog lets you step down one chainring size while keeping the same top end gearing and provides not only better ground clearance, but an overall lighter drivetrain. - 1 aluminum cogs, 10 steel cogs - Designed for use with XD™ and XDR™ drivers only

The e*thriteen Helix Race 12-speed 9-52t cassette is engineered to deliver precision shifting performance with an industry leading 578% gear range. The proprietary 9 tooth smallest cog combined with the 52t largest cog enables the use of a smaller chainring for improved clearance, lighter system weight and a lower bail out gear ratio without high gear compromise. - Seamless cross-compatibility with Shimano, SRAM, and TRP 12-speed drivetrains - Patented 2-Part design provides strength, stiffness, light weight, and ease of service - Aluminum and steel clusters can be replaced separately to reduce service cost - 9 tooth high gear allows use of smaller chainrings for clearance and weight savings - Fits XD™ and XDR™ Drivers Only (Hope XD drivers are undersized at the clamp location and require a Cassette Shim Kit -Sold Separately) - Tested extensively for analog and e-bike use

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

absoluteBLACK Oval 76 BCD Chainrings greatly improve traction and climbing abilities. They are designed for Rotor REX cranksets with their original 1x spider. Lighter and stiffer than original chainrings, these provide a super-smooth pedaling sensation. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Rotor Rex cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio

Premium Campagnolo compatible Oval chainrings designed for Super Record, Record and Chorus 4-bolt 145/112bcd cranks. They work perfectly with 11 & 12spd drivetrains thanks to our ingenious design. Incredibly stiff and light. Super-fast shifting thanks to our patented shifting ramp design. Same brilliant oval design like in the rest of the collection. Use original bolts. It is the most Premium oval chainring on the market with scientifically proven performance gains. ADVANTAGES OF OUR SPECIAL CAMPAGNOLO COMPATIBLE OVAL CHAINRINGS: - Finest design to provide excellent weight-to-strength ratio - One of a kind special oval shape (Patent Pending) - Superb quality and great look. - You will ride faster using ovals. - You will not "feel" the oval shape at all - Reduces stress on knees - We mastered our oval chainrings to perfection, so you can get best possible advantage from the oval/elliptical shape. - Size (Mass +/-1g): 53T (90g), 39T—(42g) - Compatibility: Campagnolo Super Record, Record, Chorus 4-bolt 145/112bcd for 11 and 12spd versions. - CNC machined 7075 Txxx Aluminum. Long-lasting construction - Ovality: Optimized to each size separately. 39T- 10.4%, 53T—10-11.2% - Timing of 108 -110.5° after TDC (top dead center)—ideal for road climbing

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.

SRAM and Zipp offer rotors and wheels, respectively that are compatible with the Center Lock disc rotor mounting system developed by Shimano. Center Lock offers a secure hold and perfect fit with fully compatible rotors that makes it simple to remove and install a rotor. Most road and gravel disc brake wheelsets feature the Center Lock spline system. These Zipp Center Lock Disc Lock Rings are what is referred as the external serration design, and meant to interface with a 16T/44-45mm (OD) external bottom bracket tool. Zipp is offering two versions, one for 140mm and 160mm rotors (common for road and gravel bikes), and a second for rotors from 170-203mm sizes (most common on mountain bikes). Both are machined from aluminum and feature a floating stainless steel washer on the hub interface side. Features - Center Lock disc rotor lock ring with external serration (tool interface) - Tool interface is a 16T/44-45mm (OD) type used on external bottom brackets - Compatible tools: Park BBT-9, Park BBT 69.4, Shimano TL-FC33, Chris King and many others - Machined aluminum body and threading - Floating stainless steel washer - Rotor size options: 140-160mm, 170-203mm (listed as 180mm in the selection menu) - Color: Anodized Black - Weight: 8.1 grams (140-160mm)

Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.

Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo

Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.

Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs

Zipp Speed Weaponry Cartridge Bearings

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.